Sunday, June 17, 2012

RETURN CAPITALISM TO AMERICA - THROW THE PROGRESSIVE BUMS OUT!

Forced Adoption and Support of those making less than 100,000 per year by the Ones that Are Willing to Work for A Living


I Call this 
"Adoption Thru Taxation"


I'm writing this blog because I think enough is enough!

I'm so tired of our elected leaders denouncing the heritage of the United States of America.
The time is NOW to begin to realize that the United States was founded as a Christian Nation and should continue to be a Christian Nation..Yes, people of other faiths are certainly welcome to live among us, but not as adversaries attempting at every turn to overthrow what was put in place by our Founding Fathers. If they don't share our values and our basic belief that Jesus Christ is King, then they should remain in their own element.
Christians of America please stop being passive and tolerant of people that are attempting to remove the very corner stones of our society.


Elections of great impact are about to occur.


We as Americans should be proud of our heritage and belief in God and His Creation.
No Leader of our Nation should ever apologize for this.


Yes, as a nation we have accomplished a lot and have prospered under the Blessings of God
At the same time we have educated the world and provided help and assistance for the world in greater abundance than any other nation on the face of the Earth from the beginning of history until the present. 

There is an 80 / 20 rule that applies to almost everything in life. In this case 80% of America professes that they are Christian - 20% profess that they are atheist, agnostics or of another religion altogether.
 
This is a crossroads in our history that will decide if we as a nation will vote with the 80% or the 20%.

I think we have seen over the past 2-1/2 years how bad things will be if we continue to vote for leaders that are committed to taking us on a different path than our forefather's envisioned for our nation.

I urge you to return to your Christian roots and begin to organize into small groups. Work to vet politicians and truly discover what they believe and what they intend to accomplish when in public office. Work to fund raise for the candidates that pass the litmus test. Work to turn out the vote to ensure that they are elected to office, and finally vote and take an active roll in ensuring that they live up to their promises.


Now is the time folks,

The crossroads for America is Now!


This is one man's opinion, I welcome your comments.
Tony Whyte
Victoria House Company
Manufacturer and Distributor of Southern Crossing Gates / GateBuilder Gate Frames
d
Posted by at No comments:

So Easy - Just Assemble, Install & Screw on the Facing Materials

Tension Cable Stretches - Solid X Bracing Does Not!

TELL US WHAT YOU THINK OF OUR GATEBUILDER PRODUCTS

I'm Tony Whye, Founder of GateBuilder: Buy the Best, You'll be Glad You Did!




I'm Tony Whyte founder of GateBuilder - I Invite You to Try Our Superior Products



The Design is Modular, the Construction Pure Strength, the Look is Architectural,
the Performance is Guaranteed

In an Industry that Promises You Big, Sells You Cheap and Delivers You Small,
GateBuilder Stands Tall!
THE 4TH DIMENSION IS PERFORMANCE


Victoria House Company

is the Manufacturer and Distributer of GateBuilder Gate Frames


We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.

We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantees of the companies manufacturing the product.

We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.

Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.

We absolutely guarantee our products and stand behind our products 100%

If We Say It, "Consider it Done"

We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.

We will provide you with references of satisfied customers upon request.

Tony & Diana Whyte
Owners - The Victoria House Company



GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 8550

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!
Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com










Posted by at No comments:

IT'S FATHERS DAY - GIVE DAD A NEW GATE KIT

Tension Cable Stretches - Solid X Bracing Does Not!

TELL US WHAT YOU THINK OF OUR GATEBUILDER PRODUCTS

I'm Tony Whye, Founder of GateBuilder: Buy the Best, You'll be Glad You Did!




I'm Tony Whyte founder of GateBuilder - I Invite You to Try Our Superior Products



The Design is Modular, the Construction Pure Strength, the Look is Architectural,
the Performance is Guaranteed

In an Industry that Promises You Big, Sells You Cheap and Delivers You Small,
GateBuilder Stands Tall!
THE 4TH DIMENSION IS PERFORMANCE


Victoria House Company

is the Manufacturer and Distributer of GateBuilder Gate Frames


We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.

We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantees of the companies manufacturing the product.

We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.

Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.

We absolutely guarantee our products and stand behind our products 100%

If We Say It, "Consider it Done"

We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.

We will provide you with references of satisfied customers upon request.

Tony & Diana Whyte
Owners - The Victoria House Company



GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 8550

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!
Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com










Posted by at No comments:

Your Gate is SAGGING - TIME TO TIGHTEN THE TENSION CABLE - AGAIN!!!!

Tension Cable Stretches - Solid X Bracing Does Not!

TELL US WHAT YOU THINK OF OUR GATEBUILDER PRODUCTS

I'm Tony Whye, Founder of GateBuilder: Buy the Best, You'll be Glad You Did!




I'm Tony Whyte founder of GateBuilder - I Invite You to Try Our Superior Products



The Design is Modular, the Construction Pure Strength, the Look is Architectural,
the Performance is Guaranteed

In an Industry that Promises You Big, Sells You Cheap and Delivers You Small,
GateBuilder Stands Tall!
THE 4TH DIMENSION IS PERFORMANCE


Victoria House Company

is the Manufacturer and Distributer of GateBuilder Gate Frames


We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.

We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantees of the companies manufacturing the product.

We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.

Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.

We absolutely guarantee our products and stand behind our products 100%

If We Say It, "Consider it Done"

We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.

We will provide you with references of satisfied customers upon request.

Tony & Diana Whyte
Owners - The Victoria House Company



GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 8550

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!
Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com










Posted by at No comments:
Subscribe to: Posts (Atom)