A NEW PRODUCT THAT WILL TRANSFORM YOUR GATE BUILDING

Unfortunately Most Gate Frame Products are Not What They Represent Them to Be.

If you Want a Gate that Will Last and Last,

Perform and Perform, We Provide a Gate Frame that will do That.

We Developed GateBuilder Because the Other Leading Gate Frame Products Simply Did not Do the Job Over the Long Haul.  We Were Frankly appalled by the Lack of Sound Engineering and Product Quality that is being Offered on the Market.  I Urge You to Try GateBuilder.  It is an Honest Product That Is and Does What We Promise. 

We Make the Frame to Fit Your Opening, Supply the Hardware!

Shipping is Included in the Pricing

Designed by a Former Gate Installer

Who Figured out How to Do It Better

Imagine a Gate that will never Sag

You do the Fun Part, the Art Work when you apply the Facing Materials!

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames 

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call

619 729 0420 or 619 445 1135

http://www.gatebuilderkits.com

Sincerely,

Tony Whyte

USE GATEBUILDER 'X' GATE JUST ONCE & YOU'LL BE HOOKED

Unfortunately Most Gate Frame Products are Not What They Represent Them to Be.

If you Want a Gate that Will Last and Last,

Perform and Perform, We Provide a Gate Frame that will do That.

We Developed GateBuilder Because the Other Leading Gate Frame Products Simply Did not Do the Job Over the Long Haul.  We Were Frankly appalled by the Lack of Sound Engineering and Product Quality that is being Offered on the Market.  I Urge You to Try GateBuilder.  It is an Honest Product That Is and Does What We Promise. 

We Make the Frame to Fit Your Opening, Supply the Hardware!

Shipping is Included in the Pricing

Designed by a Former Gate Installer

Who Figured out How to Do It Better

Imagine a Gate that will never Sag

You do the Fun Part, the Art Work when you apply the Facing Materials!

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames 

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call

619 729 0420 or 619 445 1135

http://www.gatebuilderkits.com

Sincerely,

Tony Whyte

What the heck are they selling @ at Home Depot & Lowes?

Unfortunately Most Gate Frame Products are Not What They Represent Them to Be.

If you Want a Gate that Will Last and Last,

Perform and Perform, We Provide a Gate Frame that will do That.

We Developed GateBuilder Because the Other Leading Gate Frame Products Simply Did not Do the Job Over the Long Haul.  We Were Frankly appalled by the Lack of Sound Engineering and Product Quality that is being Offered on the Market.  I Urge You to Try GateBuilder.  It is an Honest Product That Is and Does What We Promise. 

We Make the Frame to Fit Your Opening, Supply the Hardware!

Shipping is Included in the Pricing

Designed by a Former Gate Installer

Who Figured out How to Do It Better

Imagine a Gate that will never Sag

You do the Fun Part, the Art Work when you apply the Facing Materials!

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames 

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call

619 729 0420 or 619 445 1135

http://www.gatebuilderkits.com

Sincerely,

Tony Whyte

NOBODY DOESN'T LIKE GATEBUILDER 'X' GATE

MERRY CHRISTMAS

PERFORMANCE IS THE 4TH DIMENSION

WE GUARANTEE PERFORMANCE

STRONGER THAN WELDED
EASIER TO INSTALL
EASIER TO SHIP

MODULAR

Why GateBuilder? Because the Corner Gismo's Adjust A Gate & Others Provide are Only for Show & to Square-up the Corners

So You Might Ask, What are You Paying For?  Corner Gismo's I Guess!  

GateBuilder is a Full Steel Frame 

A Wide GateBuilder Frame Accommodates Both Wooden Facing & Opener 

See Installation Slide Show
(Link Below)

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.  

We would like to be your Gate Supplier of Choice  -  Please give me a call 

619 729 0420 or 619 445 8550

Sincerely,

Tony Whyte

I'm Tony Whyte - Give Me a Call 619 729 0420

Fully Trussed Modular Gate System

 Strongest on the Market
 
"Strength & Looks - You Can't Beat that!"

GateBuilder     Affordable Gates

GateBuilder II  $129.00  Steel Corners & Cross Bracing - Redwood Frame 

All Hardware  included

GateBuilder Starting @ $249.00  All Steel Frame & Cross Bracing  

All Hardware included 

No ONE Provides the Value that We Provide! 


We are Quality - Service - Affordability

http://www.gatebuilderkits.com 

gatebuilder@hotmail.com

 

Call Us We're Here to Talk About Your Gate Project

Steel Fully Trussed Gate Frames

Modular Kits - Free Shipping

We Size them to Your Need!

 Order today: 

619 445 1135  or  619 729 0420

http://www.gatebuilderkits.com
 

 gatebuilder@hotmail.com

Steel Gate Frame for Wood & Vinyl Gates

"Beats Adjust-A-Gate Hands Down"

Steel for Strength! Trussing in both Compression & Tension  prevents sag!

Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must. 

Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.

A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.

Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag.  .

MODULAR GATE BUILDING MAKES SENSE - SO STRONG - SO EASY - SO GOOD LOOKING

MERRY CHRISTMAS

PERFORMANCE IS THE 4TH DIMENSION

WE GUARANTEE PERFORMANCE

STRONGER THAN WELDED
EASIER TO INSTALL
EASIER TO SHIP

MODULAR

Why GateBuilder? Because the Corner Gismo's Adjust A Gate & Others Provide are Only for Show & to Square-up the Corners

So You Might Ask, What are You Paying For?  Corner Gismo's I Guess!  

GateBuilder is a Full Steel Frame 

A Wide GateBuilder Frame Accommodates Both Wooden Facing & Opener 

See Installation Slide Show
(Link Below)

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.  

We would like to be your Gate Supplier of Choice  -  Please give me a call 

619 729 0420 or 619 445 8550

Sincerely,

Tony Whyte

I'm Tony Whyte - Give Me a Call 619 729 0420

Fully Trussed Modular Gate System

 Strongest on the Market
 
"Strength & Looks - You Can't Beat that!"

GateBuilder     Affordable Gates

GateBuilder II  $129.00  Steel Corners & Cross Bracing - Redwood Frame 

All Hardware  included

GateBuilder Starting @ $249.00  All Steel Frame & Cross Bracing  

All Hardware included 

No ONE Provides the Value that We Provide! 


We are Quality - Service - Affordability

http://www.gatebuilderkits.com 

gatebuilder@hotmail.com

 

Call Us We're Here to Talk About Your Gate Project

Steel Fully Trussed Gate Frames

Modular Kits - Free Shipping

We Size them to Your Need!

 Order today: 

619 445 1135  or  619 729 0420

http://www.gatebuilderkits.com
 

 gatebuilder@hotmail.com

Steel Gate Frame for Wood & Vinyl Gates

"Beats Adjust-A-Gate Hands Down"

Steel for Strength! Trussing in both Compression & Tension  prevents sag!

Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must. 

Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.

A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.

Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag.  .

ADJUST-A-GATE MIGHT LOOK OK RIDING BY @ 30 MPH ON A HORSE

MERRY CHRISTMAS

PERFORMANCE IS THE 4TH DIMENSION

WE GUARANTEE PERFORMANCE

STRONGER THAN WELDED
EASIER TO INSTALL
EASIER TO SHIP

MODULAR

Why GateBuilder? Because the Corner Gismo's Adjust A Gate & Others Provide are Only for Show & to Square-up the Corners

So You Might Ask, What are You Paying For?  Corner Gismo's I Guess!  

GateBuilder is a Full Steel Frame 

A Wide GateBuilder Frame Accommodates Both Wooden Facing & Opener 

See Installation Slide Show
(Link Below)

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.  

We would like to be your Gate Supplier of Choice  -  Please give me a call 

619 729 0420 or 619 445 8550

Sincerely,

Tony Whyte

I'm Tony Whyte - Give Me a Call 619 729 0420

Fully Trussed Modular Gate System

 Strongest on the Market
 
"Strength & Looks - You Can't Beat that!"

GateBuilder     Affordable Gates

GateBuilder II  $129.00  Steel Corners & Cross Bracing - Redwood Frame 

All Hardware  included

GateBuilder Starting @ $249.00  All Steel Frame & Cross Bracing  

All Hardware included 

No ONE Provides the Value that We Provide! 


We are Quality - Service - Affordability

http://www.gatebuilderkits.com 

gatebuilder@hotmail.com

 

Call Us We're Here to Talk About Your Gate Project

Steel Fully Trussed Gate Frames

Modular Kits - Free Shipping

We Size them to Your Need!

 Order today: 

619 445 1135  or  619 729 0420

http://www.gatebuilderkits.com
 

 gatebuilder@hotmail.com

Steel Gate Frame for Wood & Vinyl Gates

"Beats Adjust-A-Gate Hands Down"

Steel for Strength! Trussing in both Compression & Tension  prevents sag!

Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must. 

Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.

A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.

Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag.  .

A DRIVEWAY GATE SHOULD BE WIDE, DON'T YOU THINK?

MERRY CHRISTMAS

PERFORMANCE IS THE 4TH DIMENSION

WE GUARANTEE PERFORMANCE

STRONGER THAN WELDED
EASIER TO INSTALL
EASIER TO SHIP

MODULAR

Why GateBuilder? Because the Corner Gismo's Adjust A Gate & Others Provide are Only for Show & to Square-up the Corners

So You Might Ask, What are You Paying For?  Corner Gismo's I Guess!  

GateBuilder is a Full Steel Frame 

A Wide GateBuilder Frame Accommodates Both Wooden Facing & Opener 

See Installation Slide Show
(Link Below)

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.  

We would like to be your Gate Supplier of Choice  -  Please give me a call 

619 729 0420 or 619 445 8550

Sincerely,

Tony Whyte

I'm Tony Whyte - Give Me a Call 619 729 0420

Fully Trussed Modular Gate System

 Strongest on the Market
 
"Strength & Looks - You Can't Beat that!"

GateBuilder     Affordable Gates

GateBuilder II  $129.00  Steel Corners & Cross Bracing - Redwood Frame 

All Hardware  included

GateBuilder Starting @ $249.00  All Steel Frame & Cross Bracing  

All Hardware included 

No ONE Provides the Value that We Provide! 


We are Quality - Service - Affordability

http://www.gatebuilderkits.com 

gatebuilder@hotmail.com

 

Call Us We're Here to Talk About Your Gate Project

Steel Fully Trussed Gate Frames

Modular Kits - Free Shipping

We Size them to Your Need!

 Order today: 

619 445 1135  or  619 729 0420

http://www.gatebuilderkits.com
 

 gatebuilder@hotmail.com

Steel Gate Frame for Wood & Vinyl Gates

"Beats Adjust-A-Gate Hands Down"

Steel for Strength! Trussing in both Compression & Tension  prevents sag!

Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must. 

Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.

A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.

Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag.  .

NO WHEELS, CRUTCHES, PROPS OR SKY HOOKS - JUST SOLID TRUSS ENGINEERING

MERRY CHRISTMAS

PERFORMANCE IS THE 4TH DIMENSION

WE GUARANTEE PERFORMANCE

STRONGER THAN WELDED
EASIER TO INSTALL
EASIER TO SHIP

MODULAR

Why GateBuilder? Because the Corner Gismo's Adjust A Gate & Others Provide are Only for Show & to Square-up the Corners

So You Might Ask, What are You Paying For?  Corner Gismo's I Guess!  

GateBuilder is a Full Steel Frame 

A Wide GateBuilder Frame Accommodates Both Wooden Facing & Opener 

See Installation Slide Show
(Link Below)

You Will Find GateBuilder Gate Frames are Better Than You Ever Expected

View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames

http://www.flickr.com/photos/53492525@N07/sets/72157625341915330/show/

Contractors & Gate Builders,

I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.

We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.

The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.  

We would like to be your Gate Supplier of Choice  -  Please give me a call 

619 729 0420 or 619 445 8550

Sincerely,

Tony Whyte

I'm Tony Whyte - Give Me a Call 619 729 0420

Fully Trussed Modular Gate System

 Strongest on the Market
 
"Strength & Looks - You Can't Beat that!"

GateBuilder     Affordable Gates

GateBuilder II  $129.00  Steel Corners & Cross Bracing - Redwood Frame 

All Hardware  included

GateBuilder Starting @ $249.00  All Steel Frame & Cross Bracing  

All Hardware included 

No ONE Provides the Value that We Provide! 


We are Quality - Service - Affordability

http://www.gatebuilderkits.com 

gatebuilder@hotmail.com

 

Call Us We're Here to Talk About Your Gate Project

Steel Fully Trussed Gate Frames

Modular Kits - Free Shipping

We Size them to Your Need!

 Order today: 

619 445 1135  or  619 729 0420

http://www.gatebuilderkits.com
 

 gatebuilder@hotmail.com

Steel Gate Frame for Wood & Vinyl Gates

"Beats Adjust-A-Gate Hands Down"

Steel for Strength! Trussing in both Compression & Tension  prevents sag!

Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must. 

Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.

A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.

Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag.  .